Gas flow control

Image title

It is important to control icing or heating by modifying nitrogen or helium gas flow. Follow the below steps to change the gas flow

Automated gas flowrate change: talk to the staff scientist

  • FOURC> flow_set <number>
  • FOURC> flow_get

Manually change the flowrate

  • Step 1 : Press ENT in the gas flow meter
  • Step 2 : Press up or down arraow to change the number (right now it is showing 9.04 liter/min in the above gas flow meter)
  • Step 3 : Right or left arrow will take you to the desired digits
  • Step 4 : Press ENT again in the gas flow meter, it will go show the desired final values
  • Step 4 : If you don't need to change anything, press ESC